The Lockwood Digital DX Locksets provide a mechanical method of keyless entry.
For extra security when under forced attack, the inbuilt clutching mechanism allows the outside knob to rotate without operating or damaging the lock.
The factory set 5 digit code is easily changed to any 4, 5 or 6 digit code using the code changing kit provided with each lock.
Suitable for heavy duty use in industrial and commercial buildings, institutions, clubs, schools, hospitals, hotels, and similar buildings.
3570 Series Cylinder Mortice Locks are made from quality materials to meet high durability and strength requirements.
These locks have various latching functions which can be operated by key or handle outside and by turnknob, key or handle inside.
Designed and manufactured in Australia the Selector® 3782EL is a high performance electric mortice lock for narrow stile hinged doors. Designed to meet the varying requirements of commercial applications the lock can be operated by push buttons, intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers. These locks comply with building regulations for single-action escape doors.
The 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
Designed in Australia, the 001 Double Cylinder Deadlatch incorporates innovative safety features including Safety Release™ and LockAlert® offering market-leading performance and reliability for your home
Features of the 001 Double Cylinder Deadlatch
Available in Knob and Lever versions
Conforms to the security and durability requirements of Australian Standard AS4145.2-2008 | SL7D8C6
Cut-resistant Stainless Steel Bolt
11 concealed anchorage points and a door frame strengthener that combine to offer high security protection
Hold back function that allows you to use the door in passage mode
The 507 Nightlatch is fire rated to 4 hours, making it ideal for a range of commercial applications including utility and service cupboards.
Features of the 507 Fire Rated Nightlatch
The Lockwood 507 Rim Nightlatch has been fire rated up to 4 hours on fire door assemblies in accordance with Australian standard AS 1905.1:1997, Part 1: Fire Resistant Doorsets
Easy to operate with a lever turn to retract the latch or key from outside (not supplied)
304 stainless steel latch bolt, lock case and striker plates
Durable lock mechanism tested to 500,000 operations
Corrosion resistance tested to 168 hours neutral salt spray
Supplied with striker plates to suit standard open in and open out door installations
Lock handing can be easily changed in seconds by releasing the handing catch and twisting the bolt
High quality brushed stainless steel finish with welded joints on lock case and striker
Supplied less cylinder for use with building master key systems
Standard Lockwood 201 cylinders available for installations not requiring restricted keying
Part Number: 507SSS No cylinder
Supplied in trade pack only
25 Year Mechanical Warranty
The Lockwood 680 Patio Bolt is a strong, heavy duty, surface mounted product designed to improve security in a range of residential sliding and hinge door applications.
It is easy to install and has been designed to suit a wide range of aluminium and timber sliding patio and hinge door applications.
It is offered in gold, chrome plate, satin chrome pearl and a range of powdercoat finishes.
Features of the 680 Patio Bolt
Easy to install
High purity high pressure zinc alloy case
Steel, zinc plated bolt
Concealed fixing by conventional cross recess head screws
Solid brass 5 pin cylinder
Can be keyed alike, master keyed, grand master keyed, maison keyed or construction keyed in Lockwood C4 5 and 6 pin, Generation Six and Twin keying systems
Exceeds Australian Standard 4145.2-2008, Mechanical Locksets for Doors and Windows in Buildings, to Level SL6. Exceeds Australian Standard 4145.2-2008, Mechanical Locksets for Doors and Windows in Buildings, with standard length bolt, to Level SL4 – with extended length bolt accessory.
Designed in Australia, the Paradigm 005 Double Cylinder Deadbolt represents the pinnacle in deadbolt security products.
Incorporating innovative safety features including Safety Release™, LockAlert® and DualSelect®, the 005 Double Cylinder Deadbolt is ideal for residential and architectural applications.
Features of the 005 Double Cylinder Deadbolt
Conforms to the security and durability requirements of Australian Standard AS4145.2-2008 | SL8D8C6K5
Multi-mode slimline deadbolt providing safety, security and convenience
Simple to install
High security cut resistant stainless steel bolt
Available in round or square designs
Box strike with concealed crossgrain doorframe strengthening screw
The Lockwood High Security 334 Series Brass Case Padlock range feature shackles designed for high security and high corrosion applications.
Suitability
Commercial and industrial applications.
Features of the High Security 334 Series Brass Case Padlocks
Heavy duty, solid brass case extrusion
High corrosion resistant 8.7mm Boron steel Rapid Change Shackle
Rapid Change Function allows the release of the shackle by turning the key and depressing the pin
Double ball locking
Extended shackle models
Stainless steel shackle models
Standard as latching function
Can be converted to deadlocking (key retained) by simply relocating the camplate pin in the cylinder assembly
SCEC Endorsement
The 334B45/119 model padlock is SCEC Endorsed for Intruder Resistant Areas.
Conditions of SCEC Endorsement
The padlock must be configured key retained
Must be fitted with a SCEC approved cylinder rated for the area for which it will be installed
ASSA ABLOY’s Lockwood CORTEX® is leading the evolution of Digital Door Locks. CORTEX® is a commercial grade Digital Lockset that offers a standalone electronic access solution that can also be easily integrated to existing systems.
Innovative locking coupled with the durability and quality that is synonymous with the Lockwood brand, certifies Cortex as the premium choice for intelligent locking.
Moreover, CORTEX® is the first Australian digital lockset to be fire rated for 530 latch and Lockwood mortice variants and always has free egress from the inside.
The Lockwood CORTEX® features ultra-smooth lever action provided by the ergonomic Lever: 77A. Compliant with AS1428.1-2009 (Disabled accessible complaint levers); CORTEX® has undergone severe vandal testing and has a strength rating of up to SL8.
For more than 30 years Lockwood’s iconic 001 Deadlatch has been securing homes in Australia. The 001 as we know it today has now become digital. As with the original product, the Lockwood 001Touch™ uses the 001 Deadlatch to secure the door internally however, the external cylinder has been replaced with a stylish digital touch screen keypad. The ability to use a pin code or key card offers a convenient keyless solution.
Key Features of the Lockwood 001Touch™ Keyless Digital Deadlatch
Touch screen Keypad
The touch screen keypad has no mechanical buttons which means no trace of your secret pin code.
4-12 Digit pin code
Choose a pin code from 4 – 12 digits, this could be ideal for children or occupants that lose keys on a regular basis.
Key Cards
Program up to 20 Key cards into your lock and have the ability to remove them individually.
Conforms to Australian Standard AS4145.2-2008
The 001Touch has been tested in accordance with the Australian lock standard.
Secure Mode
You have the option to lock the 001Touch with the internal key, the key card and pin number automatically unlocks upon entry. This safety release function minimises the chance being locked inside your house.
Low power consumption
Unlock your door up to 10,000 times with one set of 4 x AA batteries. We recommend the batteries are changed every 12 months regardless.
Master code
You will have the ability as a Master to add and delete users.
User code that expires
You have the ability to program a code that may last from 3 – 336 hours. This is ideal when a tradesman requires access to your house for a few hours or when your neighbour is looking after your home for up to 2 weeks and the duration you would like it to last.
Cryptic code function
Prevent others from identifying your pin code during access, the cryptic code function confuses the onlooker but at the same time allows you to still gain entry.
User codes and setting remain if batteries are removed
The settings, codes and key cards will remain programmed in the lock in the event the batteries are depleted.
Automatic Locking
Once the correct code or key card is presented, the lock will remain unlocked for 5 seconds and will lock automatically when the 5 seconds expire.
Visual guide for programming
For added convenience, a light guide will assist in the programming of some key features. (Refer installation guide)
The Lockwood Digital DX Locksets provide a mechanical method of keyless entry.
For extra security when under forced attack, the inbuilt clutching mechanism allows the outside knob to rotate without operating or damaging the lock.
The factory set 5 digit code is easily changed to any 4, 5 or 6 digit code using the code changing kit provided with each lock.
Lockwood Digital DX Locksets are designed to control access into commercial areas, especially when frequent combination changes are needed to maintain security.
As the digital lockset utilizes mechanical operation, electrical wiring is not required. Selected locksets combined with digital access pads provide keyless entry.
Features of the 530 Digital DX Entrance Set
Outside
Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turn knob the code is automatically cancelled.
Inside
Opened by knob at all times.
The Lockwood 8654 Hinged Security Door Lock has been designed in Australia and manufactured to stringent quality specifications.
The range has been tested in accordance with AS4145.2-2008, offering exceptional performance and reliability. Incorporating Lockwood’s advanced safety and security feature, DualSelect®,the 8654 Hinged Security Door Lock is ideal for use in residential applications.
Features and Specifications of the 8654 Hinged Security Door Lock
2 stage key locking, offers safety and security for all occupants by giving a choice of selecting safety mode or secure mode when exiting the home
Turning the key to the first selection engages the safety lock, this offers security from the outside whilst allowing occupants inside to safely exit using the internal lever and snib
Turning the key to the second selection engages the secure lock, this provides internal and external security, and requires the key to unlock the door from inside and outside.
Suits left or right hand opening doors
Stainless steel hookbolt for increased security
Key locking from both sides
Inside snib locking (with key override)
Large ergonomically improved snib to assist with operation
Snib only version also available
No snib version also available
Stainless steel front end plates
Self latching with stainless steel hook deadbolt for improved security performance
Can only be locked when fully engaged with strike
Optional 3 point kits available for premium security
When 3 point kit is fitted, snib activates/operates all 3 locking points
Push on actuating bar suits above or below centreline applications
Available in a range of polyester powdercoat and plated finishes
Fits industry standard cut outs/door preparation
Retrofits Whitco Tasman Mk2 and Mk3 Locks
Zinc diecast lock mechanism and furniture
Easy installation for both new and retrofit applications
Accepts Lockwood Euro profile lazy cam cylinder
Suit standard 20mm door thickness
Available in display and trade packs
The Lockwood 2616 CAM Action Door Closer is a premium, high quality door closing device. When opening a door fitted with a Lockwood 2616 CAM Action Door Closer, the force required is less than that of a rack and pinion type door loser and continues to decrease through the opening arc.
This aesthetically appealing, narrow profile CAM Action Door Closer is suited for public and commercial applications where children, the elderly and the disabled are likely to be using the door.
The Lockwood 2616 is light to open, but its adjustable closing force is high enough for heavy duty applications. One model (2616) covers right hand and left hand applications, pull side/ push side applications and also features an adjustable arm height.
The 2616 has a very high efficiency of 70% – 80%
The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper. Pre-load is a common condition that is caused by pulling on a door before it unlocks, the weight of warped or drooping doors, seals on fire doors, or by differential air pressure created when heating and cooling systems are in use.
Standard features include multi voltage 10 – 30Vdc and field changeable settings from fail safe to fail secure.
Built to last, this is a premium locking solution that has been tested in excess of 2 million cycles and boasts unique features like no other available on the market today.
Key Features
Operates under pre load up to 25kg
Easy field selectable fail safe/fail secure
Multi voltage 10-30Vdc
1300kg holding force
2.5 million cycles endurance rating
Latch keeper is significantly quieter in operation
Weather resistant
Mounting tabs as standard
Non handed
TRICARE® 5 Year Warranty
Weather Resistant (IP54)
Built in Protection Diode
Designed for both internal and external doors, the Lockwood Roller Bolt is suited to a wide range of applications and perfectly complements the Paradigm deadbolt range and Lockwood Entrance handles.
The roller bolt functions to “snap” in and out of the strike which will keep the door closed when it isn’t locked. This means a lever / knob is not required to open the door.
Features
Adjustable bolt projection with locknut to prevent loosening
Suitable for internal and external doors
Non-handed product
Satin Chrome face plate and T strike
Fixing screws
Both 30mm and 90mm strikes supplied as standard
Lockwood offers door stops for wall and floor mounting with quality design, finish and appearance.
A290 Half Moon Door Stop
Designed to be floor mounted, the door stop prevents doors and handles damaging walls and fixtures. The black rubber buffer gives further protection for door finishes.
A292 Half Moon Door Stop Packer
10mm packer to suit A290 half moon door stop.
A350 Door Stop
Designed to be wall mounted, the door stop prevents doors and handles damaging walls and fixtures. Model 350 features concealed fixing (behind the rubber buffer).
A300 Door Stop
Designed to be wall mounted, the door stop prevents doors and handles damaging walls and fixtures. Model 300 features concealed fixing (behind the rubber buffer).
A250 Door Stop
The 250 is a floor mounted door stop of quality design, finish and appearance. The resilient rubber buffer provides excellent protection for door finishes.
A280 Round Door Stop
This general purpose door stop is floor mounted and prevents doors and handles damaging walls and fixtures. The black rubber buffer provides further protection for door finishes.
A310 Magnetic Door Stop
Designed to be wall or floor mounted, this door stop incorporates a magnetic catch to hold the door in the open position.
857 Door Stop
A coil spring and ball ensure the arm indexes at “out of way” position. Designed for use as a bottom rail door stop.
The Lockwood AH130 is a heavy duty fast fix hinge with face fix flanges to suit aluminium commercial door applications. Heavy duty, bi-directional face fix locator flanges allows for faster installation.
Installation Guide
Minimum door thickness 40mm
Up to 2100 high x 900 x 100kg– 3 hinges
Up to 2400 high x 900 x 100kg– 4 hinges
Fixing
Heavy duty bi-directional fixing
Face fix locator flange allows for faster installation
Supplied with 11 of 10G x 12mm, 304SS undercut countersunk self tapping (AB) Phillip drive screw
Designed and manufactured in Australia the Selector® 3782EL is a high performance electric mortice lock for narrow stile hinged doors. Designed to meet the varying requirements of commercial applications the lock can be operated by push buttons, intercom systems and key switches; or integrated with electronic access control systems for use with higher security devices such as keypads or card readers. These locks comply with building regulations for single-action escape doors.
Key Features
Variable voltage from 9 – 28VDC
Simple in field selectable from power to lock to power to open
Full range of monitoring including REX, Deadlatch, Door position, KOM and lock status
On board door status LEDs improves installation and reliability
Unique functions for double reader applications which allows external side to fail securely while internal side fails safe allowing free egress escape
Motor driven providing lower power usage in some applications
